News, tips, blogs and updates..
Soon introducing Rockpecker PLUSHIE
〰️
We are now on the No-Dig Down Under'23 Portal
〰️
Newly Opened AUS Distribution Center
〰️
Upcoming release of a economical alternative of VRS
〰️
Find us at NDDU-23's Stand-71
〰️
Soon introducing Rockpecker PLUSHIE 〰️ We are now on the No-Dig Down Under'23 Portal 〰️ Newly Opened AUS Distribution Center 〰️ Upcoming release of a economical alternative of VRS 〰️ Find us at NDDU-23's Stand-71 〰️
Blogs
The main benefit of directional drilling is that it enables drillers to exploit multiple oil reservoirs with a single well, thereby reducing the total cost of drilling while also limiting the environmental impact of drilling.
“Once the claws of the woodpecker are buried deep into the bark of the tree, it will use its stiff body to balance and brace itself while pecking.”
The process of drilling a pilot hole along a present path between the predetermined entrance and exit points is known as directional drilling. Over the past 50 years, it has undergone modifications to allow for the drilling of multiple holes from a single rig; in the past, vertical drilling was the only method available for drilling a wellbore.
What factors could you think of that make the drilling job satisfying and profitable?
Of course, your capabilities in terms of expertise, and experience, along with the abilities of the equipment you employ in drilling jobs play a vital role in sailing through drilling assignments smoothly.
What we can term an ideal bit is one that provides consistent performance, fast response times in soft to medium-hard formation, toughness and moderate application complexity along with competitive cost; however, such a bit does not exist as of yet.
We are so thrilled to share this with Australian Drillers about establishing Rockpecker ’s new Distribution Centre and Warehouse at a prime location of Arndell Park, New South Wales, Australia.
A hole opener is a popular fixed diameter borehole enlargement tool that is used in all facets of drilling in several industries including oil & gas. While some hole openers run with roller cones, there are a few other categories too that do not run on roller cones. Considering the fact that most horizontal hole openers do not have a moving part, there is no fear of losing the cones.
The art of directional drilling has been around for more than a hundred years now. In this drilling method, the direction and deviation of a well bore is controlled to reach a pre-determined underground location.
While drilling is one of the oldest practices in history, drilling technology has come a long way since drilling began.
The drilling industry prides itself on being a reliable and steady force in the business world. PDC drill bits, for example, have been applied globally in numerous industries, from offshore oil extraction to mining to water well digging.
A lot of experts talk about drilling tools and accessories, but not enough talk about making the job easier for the drilling professionals.
If the most recent statistics are to be believed, the global HDD market may cross $15 billion by the year 2022. Needless to say, HDD has revolutionized the drilling industry and certainly, there’s no looking back
Mankind has built millions of tools to make holes, however, PDC drill bit is there to rule them all!
PDC drill bits are typically available in two styles – matrix-based and steel-based. As far as steel’s metallurgical properties are concerned, it can withstand high impact loads but needs protective features to keep it from abrasion and corrosion. Steel based PDC drill bits are manufactured by machining the steel bars per design.
The selection of the right hole opener and drill bit plays a pivotal role in ensuring the success of any drilling operation and that is exactly why it is important to be extra careful while choosing one.
Directional drilling has gained significant popularity as a technique to get otherwise hard to access natural gas or oil embedded in shale. It does so by controlling the path of the wellbore by manipulating the angle of the PDC bit, as opposed to simply drilling straight down
Shearing is no wonder one of the most efficient ways of drilling most rock types, but for the longest time, the cutting elements were either too small or would wear down too soon.